Google Rating
4.9
Read our 3,000+ reviews
TLS Air Conditioning & Insulation installs attic insulation, Batt Wall Insulation and garage door insulation and seals ducts for Pinellas Park, FL homeowners from our local office at 6210 44th St N. We’ve been family-owned since 2015, give free written estimates and handle Duke Energy rebate paperwork on qualifying jobs.
Google Rating
Read our 3,000+ reviews
Angi Rating
Read our 400+ reviews
Yelp Rating
Read our 100+ reviews
HomeAdvisor Rating
Read our 500+ reviews
Facebook Rating
Read our 100+ reviews
Uneven attic coverage, air leaks, and damaged insulation can leave rooms uncomfortable while your AC keeps running. Finding the cause starts with checking the attic, accessible ducts, and the spaces where heat enters your home.
TLS Air Conditioning & Insulation is a family-owned insulation contractor serving homeowners since 2015. Our Pinellas Park team provides attic insulation, batt wall insulation, insulation removal, garage-door insulation, duct sealing, and blower-door testing.
We measure before recommending work. Our team checks insulation depth, coverage gaps, moisture damage, ventilation clearances, and air leakage. Blower-door testing can help identify whether sealing is needed before additional insulation is installed.
We install blown-in fiberglass across suitable attic floors, fit batt insulation within open framing, and add foam-board panels to compatible garage doors. Trained, background-checked TLS employees complete the work, with no outside subcontractors. You receive documented findings and written, itemized pricing before approving the project.
Our Pinellas Park team also serves Clearwater, Dunedin, Seminole, Oldsmar, and nearby communities. Call our office to schedule a free insulation estimate.
Our Pinellas Park office handles attic, wall, garage door and duct work, so you can match a Duke Energy Home Energy Check recommendation or your hottest rooms to the right job below.
Start in the attic, where roof heat settles over your ceilings.
Attic insulation helps limit heat transfer through your ceilings. We measure existing depth and coverage, then add blown-in fiberglass where thin or uneven areas need more material.
Blown-in insulation fills attic floors where joists, wiring and tight corners leave gaps that batts can’t close. We blow in fiberglass to the depth your attic needs and measure coverage before and after the job.
Batt insulation fits accessible walls, floors, ceilings, and additions with open framing. We fit fiberglass batts between framing members without gaps or compression, making construction and remodeling suitable times for installation.
Attic insulation removal addresses wet, contaminated, pest-damaged, or heavily compacted material. We vacuum affected sections before approved replacement work begins. Dry, usable insulation may remain if its condition allows.
Duct sealing reduces air loss through leaking joints and connections. We seal suitable, accessible points with mastic and identify damaged duct sections that need separate repairs.
Garage-door insulation helps reduce heat transfer through suitable door panels. We check the door’s construction, balance, and operating clearances before installing foam-board panels on compatible sectional and tilt-up doors.
Whole-home insulation planning helps you prioritize improvements across several spaces. We provide an itemized scope for attic, wall, garage-door, and duct work, showing what needs attention now and what can wait.
Blower-door testing measures whole-home air leakage using a fan fitted to an exterior doorway. The results help us determine whether air sealing should form part of your insulation plan.
We’ll climb up, measure it and tell you what you’ve got.
Members get two visits a year, priority scheduling, 10% off all services, an AC tune-up and inspection, an attic insulation check and no overtime charges. For an insulation customer, the attic check matters most, because someone looks at the depth again before thin spots cost you comfort.
TLS started with insulation, and co-founder Seth Hoerig leads this side of the company. His experience guides our inspections, material selection, and installation plans.
Thin insulation may be only part of the problem. We inspect attic coverage, accessible ducts, moisture concerns, ventilation paths, and air leakage together. Our recommendations address the conditions we find in your home.
We install blown-in fiberglass across suitable attic floors and fit batt insulation within accessible walls, ceilings, floors, and additions with open framing. We recommend garage-door insulation and duct sealing where the construction and condition support the work.
Trained, background-checked TLS employees complete every approved insulation project. Your written estimate lists the work and pricing before you approve it, and one company remains accountable through the final walkthrough.
Call the Pinellas Park office or send the online request, and the visit runs in five steps.
A TLS technician inspects the attic, walls, garage door or ducts you asked about.
We measure what is there and recommend the work that fits it.
You receive an itemized estimate in writing, so you can weigh your options.
Our crew prepares the area, installs the insulation and seals the gaps.
We review the finished job with you, including coverage and depth.
6210 44th St N #21, Pinellas Park, FL 33781
(727) 624-1856
Company line (833) 857-7283
Open 24 hours, 7 days a week
Spread the cost through GoodLeap. Checking your eligibility takes a few minutes and does not affect your credit score.
Rates and terms vary, and credit approval is required.
Get a written price for your insulation work before anything is decided.
It takes minutes and does not affect your credit score.
Review the available payment options, then decide what works for your budget.
Veterans, first responders, seniors and teachers qualify for discounted pricing, as do their immediate families. We may ask for proof of affiliation. Mention your eligibility when you book.
We’re a participating Duke Energy and FPL rebate contractor, and we complete the rebate paperwork on qualifying jobs. Duke says a completed Home Energy Check opens up to $3,800 in rebates across several upgrades, and attic insulation is one of them. That figure is a combined cap across upgrades, not an attic payment. Duke can revise its programs at any time, so ask us for current terms.
Which program applies depends on who supplies your electricity. We check your address before we talk rebate numbers. The federal 25C tax credit expired on December 31, 2025.
Your quote comes from measurements taken in your own attic. Four things move it the most, namely the depth already in place, the attic’s size and how hard it is to reach, whether old material has to come out first, and any air sealing or duct work that goes with the job. Wall jobs depend on how many stud bays are open for batts. Our cost guides break these down in how much it costs to insulate an attic and fiberglass insulation cost.
* New insulation jobs are priced from measurements taken on site, so we don’t print a per-square-foot figure here.
Two local rules shape how an insulation job runs here. Duke Energy’s attic rebate depends on the insulation already up there, and the City’s post-storm permit plan changes the order of work when a roof has leaked.
Duke Energy completed 460 Home Energy Checks in Pinellas Park in 2025. It also teamed up with the City of Pinellas Park on a summer energy-saving campaign announced in June 2026. If you’ve had a check, or plan to, the attic rebate comes with a test that only a measurement can answer.
The check has to happen before the work or within the previous 24 months, and the insulation recommendation has to come from it. Your attic’s existing insulation must have a weighted average of R-19 or less, the home needs whole-house cooling or electric heating, and a Duke-approved contractor has to install the new layer. A home that has already used the attic program can’t use it again, apart from a narrow exception for an uninsured “Act of God” loss.
Census Bureau estimates for 2020 to 2024 put mobile homes at about 15 percent of Pinellas Park’s housing units, and Duke’s attic rebate does not cover manufactured homes. For every other home, a TLS technician reads the depth first. That number tells you whether you need a top-up, a removal and replacement, or nothing at all, and whether the rebate is open to your home. Duke Energy’s attic rebate requirements →
The City of Pinellas Park adopted a Post-Storm Recovery Permitting Plan effective May 1, 2026. After a hurricane, tropical storm or other declared emergency, a local state of emergency, a governor’s order or a decision by the City Manager or Building Official can activate it.
While it is active, the plan says removal of wet drywall, insulation, carpet and cabinetry may generally go ahead without a permit unless the Building Official decides otherwise. Roof replacement, substantial roof repairs and repairs to flood-damaged structures do need permits. The plan says nothing about installing new insulation.
For a soaked attic, that sets the order. Repair the roof first, because new insulation under a leak gets wet too. The wet insulation can then usually come out without a permit, and fresh insulation goes in last. Call the City’s Building Development Division if you’re unsure about your own project. City of Pinellas Park post-storm plan →
Our crews install insulation in homes across Pinellas Park, working from our office on 44th St N. We provide attic, batt wall, and garage-door insulation, along with insulation removal, duct sealing, and blower-door testing.
Residential and street-delivery ZIP codes within our Pinellas Park coverage include:
3378133782
Service should be confirmed by street address and property type.
Our Pinellas Park team also serves nearby communities by direction from central Pinellas Park:
TLS has seven offices serving more than 90 communities across Tampa Bay and Southwest Florida. This office and our St. Petersburg office are the two in Pinellas County, and the Pinellas County page lists the communities across both.
Across the bay, our Tampa office is in Hillsborough County. South of there, the Sarasota, Venice and North Port offices are in Sarasota County, and Punta Gorda is in Charlotte County. Need cooling work too? See AC and insulation in Pinellas Park. Every community is on our locations page.
Book a visit and we’ll read your insulation depth, then price any fix in writing.
Florida’s energy code sets insulation minimums for new construction, additions and alterations, so it isn’t a rule that a finished home must reach a set level. The R-value answers below give the figures the code table lists for Pinellas County’s climate zone. Ask the City’s Building Development Division about a specific project.
R-38 is the ceiling level the code lists for Climate Zone 2, which includes Pinellas County, and it is the level we install to. Duke’s attic rebate works the other way around, because it only opens when your current insulation averages R-19 or less. That is a program rule, not a target. Measuring tells you how far your attic is from R-38.
For attic floors we install blown-in fiberglass, because it fills the gaps around joists, wiring and tight corners. Cellulose is the other common loose-fill choice, and our fiberglass versus cellulose comparison sets the two side by side. For more on what suits this climate, read our guide to the best attic insulation for Florida. Your attic’s condition makes the final call.
We don’t publish a flat price, because the number depends on your attic. Every estimate is free and in writing, and the factors that move it are listed under What Shapes an Insulation Quote above. Our attic insulation cost guide adds more detail.
Possibly, if Duke Energy supplies your electricity and your attic averages R-19 or less. The Duke section above sets out the main conditions, including the Home Energy Check and the approved-contractor requirement. Manufactured homes are excluded. We handle the paperwork on qualifying jobs, and you can ask us for current terms.
Some homeowners insulate their own attics, but Duke’s attic rebate requires a Duke-approved contractor, so a do-it-yourself job sits outside that rebate. If you’d like a second opinion first, we’ll measure what you have and give you the number.
Our crew removes it with specialized vacuum equipment, then cleans the attic before anything new goes in. Price depends on how much material is up there and how hard the attic is to reach, so we quote after a look. Our attic insulation removal cost guide explains the factors.
That depends on how you use the garage, and we don’t promise a savings figure. Our garage door insulation page explains the foam board panels and which door styles they suit, so you can judge whether the job fits your garage.
For wood-frame walls in Climate Zone 2, the code table lists R-13, and it gives mass walls their own figure in a separate column. We install batt insulation cut to fit between studs, and we never blow insulation into walls. We check how your walls are built before we recommend anything.
It depends on how wet it got and how long it stayed damp. The EPA advises drying water-damaged areas within 24 to 48 hours to prevent mold growth, and we look at the material before we recommend removal. The City’s permit rules for storm damage are in the section above, and our guide on what to do when insulation gets wet covers the next steps.
GET A FREE COST ESTIMATION